Electricians in Crewe, Cheshire

Fuse box replacement in Crewe: modern protection for an older house

If your fuse box has a wooden back, pull-out fuses or no test button, it belongs to another age. Describe what you have and a local electrician will call you back with a free quote.

Ask a Crewe electrician for a quote

Four short boxes. A minute at most.

By sending this form you agree to your details being shared with a local electrician so they can contact you. See our privacy notice.

  • Wire fuses replaced with switches you simply flick back on
  • Protection that cuts the power in a fraction of a second
  • Room for a shower, a cooker or a car charger later
  • Tested and certified, with typical UK prices on this page

The box nobody has opened in decades

It sits in the cupboard under the stairs behind the ironing board. It is brown or black, it has a big lever on the side, and you have never been quite sure which fuse does what.

When a fuse blows you are meant to pull it out and thread new wire through it. Most people have no fuse wire in the house. Some have been tempted to use whatever would fit, and a fuse mended with the wrong wire protects nothing.

An old board was built to stop cables overheating. It was never designed to save a person from a shock. A modern one is.

Electrician in a navy sweatshirt kneeling at the cupboard under the stairs in the hallway of a terraced house

How it works, start to finish

  1. Describe the fault or the job

    Type your name, phone number and area, then say what is happening in plain words. Which switch trips, which room, how long it has gone on. If it cannot wait, set the urgent switch to yes.

  2. A local electrician phones you

    An electrician who works around Crewe calls at the time you chose. Expect a few questions about the house and the fuse box. Many jobs need a short visit before a firm figure can be given.

  3. You choose what happens next

    You are given a price for the work. Have it put in writing, think it over, and say yes only if it suits you. Sending the form costs nothing and ties you to nothing.

Old fuse box or modern consumer unit?

The proper name for a modern fuse box is a consumer unit. Here is how to tell which you have without touching anything but the cupboard door.

  • A wooden back board, or switches cased in cast iron. Electrical Safety First says a fuse box like this will need replacing.
  • Fuses that pull out and hold a strand of wire. These are rewirable fuses, an old design.
  • A row of small switches and a button marked Test or T. That button belongs to an RCD, the device that protects people. Electrical Safety First says to look for it to find out if you have one.
  • A row of switches but no test button anywhere. You have circuit breakers but may have no RCD protection at all.

An RCD watches the current flowing out and back. If some of it goes astray, through damp, a damaged cable or a person, it cuts the power almost at once. Checkatrade's guide gives the everyday example of slicing through a lawnmower cable.

What a new fuse box typically costs

Tap a job for the usual UK price range. Checkatrade's guide also sets it out by type of house: about £350 for a terraced property, about £550 for a semi-detached and about £750 for a large detached one, with the wiring in good order and the board staying where it is.

Get this job priced for your own house

Four short boxes. A minute at most.

By sending this form you agree to your details being shared with a local electrician so they can contact you. See our privacy notice.

Each guide price in one list

JobUK guide price
Electrical safety check (EICR)An inspection and test of the fixed wiring in a home, with a written report. Repairs found by the check are priced separately.£100 to £250typical about £200
Fuse box replacement (new consumer unit)The typical figure is for a ten-way unit with RCBOs, fitted. The guide gives from £350 for a small home with six circuits and up to £800 for a large one with twelve or more.£350 to £800typical about £485

These are typical UK guide prices read from the Checkatrade cost guides named. They are not a quote, and Checkatrade lists them before VAT. The real price depends on your house: its size, the age and state of the wiring, how easy the cables are to reach and what testing turns up.

The cost guides these figures were read from

What happens on the day

The wiring is tested before the old board comes off. This matters. A modern consumer unit is far more sensitive than an old fuse box, and a fault the old one ignored for years will trip the new one on the first evening. Checkatrade's guide puts it plainly: defects in the existing wiring must be fixed before the board is replaced.

Then the power goes off and the boards are swapped. Each circuit is connected to its own switch and labelled, so you can see at a glance which one feeds the kitchen sockets and which the upstairs lights. The earth connections to your gas and water pipes are checked and brought up to date if they need it.

Last, every circuit is tested again and the results are written on a certificate. Plan for some hours without power, and charge your phone the night before.

The rules on changing a fuse box

Fitting a new consumer unit is one of the jobs the Planning Portal lists as notifiable under Part P of the Building Regulations in England. In plain terms, building control has to be told about it.

You do not have to do the telling if the electrician is registered with a competent person scheme. They certify their own work, and the Planning Portal says you should receive a Building Regulations Compliance Certificate within 30 days. You should also be handed an Electrical Installation Certificate with the test results. Our guide to finding a good electrician in Crewe explains how to check a registration.

Fuse boxes in Crewe's terraces and estates

In a Victorian terrace the fuse box was fitted long after the house was built, wherever the supply cable happened to come in. That is often the cupboard under the stairs or a spot high up beside the front door. There may be more than one box, added as the house gained a cooker, a shower and an extension.

A new consumer unit gathers all of that into one tidy board. If the old position is awkward, the board can be moved, though it adds to the bill. Checkatrade's guide puts moving a consumer unit at about £400.

A new board does not make old cable new. If the tests show the wiring itself is worn out, the electrician will tell you, and rewiring may be the honest answer. If your board trips often, start with fault finding.

Electrical services in Crewe

Crewe and the places around it

An electrician for the whole of Crewe and for these villages and towns nearby.

  • Crewe town centre and Nantwich Road
  • Coppenhall
  • Hightown
  • Leighton and Barrows Green
  • Woolstanwood and Rope
  • Wistaston
  • Willaston
  • Shavington
  • Wybunbury
  • Weston
  • Crewe Green
  • Haslington and Winterley
  • Nantwich
  • Sandbach
  • Alsager

See all the areas around Crewe

Four things worth knowing

  • Nothing to pay and no one to answer to. There is no fee for sending the form. You are never obliged to accept a price, and you can walk away at any stage.
  • Only four boxes to fill. You give a name, a number, your area and the fault. No email address, no street address, no account to set up.
  • Prices here are sourced, not made up. Each figure on this site is a typical UK guide price read from a published cost guide, with the guide named and linked beside it. Your own home will need its own quote.
  • Your details are used for this job only. They go towards getting your electrics sorted. Nobody sells them on, and you will not get marketing because of them.

Common questions

Will a new fuse box stop my electrics tripping?

Only if the old board was the cause. Most tripping comes from a fault on a circuit or in an appliance, and a new board will trip on that fault as well, often more readily. The fault has to be found and fixed first. What a new board does give you is each circuit on its own switch, so one fault no longer takes out half the house.

Is changing a fuse box something I can do myself?

No. It means working on the main supply to the house, and it is notifiable work under Part P of the Building Regulations. It needs a qualified electrician who can test the wiring and issue the certificates.

How many circuits will my new fuse box need?

That varies from one house to the next. Checkatrade's guide uses six circuits for a small home and twelve or more for a large one, and says the number of circuits is the biggest influence on cost. It is wise to leave a couple of spare ways for a shower, an outdoor socket or a car charger in future.

The cheapest big safety upgrade in the house

An old fuse box will sit there working for years, right up to the day it is needed to save someone from a shock, and then it cannot. Surveyors and buyers look at the board early on, and an outdated one raises questions about everything behind it.

Say what your fuse box looks like and where in Crewe you live. You pay nothing for the quote.

Ask a Crewe electrician for a quote

Four short boxes. A minute at most.

By sending this form you agree to your details being shared with a local electrician so they can contact you. See our privacy notice.

Get a free quote